Simulation Model Proposed For Estimation Of Modal Displacement of RC Building Located In Seismic Zone-V Is-1893-2002 From Known Parameters

Cite this:
Arjun Sil, T. L. (2015). Simulation Model Proposed For Estimation Of Modal Displacement of RC Building Located In Seismic Zone-V Is-1893-2002 From Known Parameters. Asian Journal of Current Engineering and Maths, 4(2), 20–23. https://doi.org/10.15520/ajcem.2015.vol4.iss2.23.pp20-23.
© 2022 Interactive Protocols
RIGHTS & PERMISSIONS
Article Views
171
Altmetric
1
Citations
-
LEARN ABOUT THESE METRICS
   PDF  

Abstract

The seismic analysis and design of reinforced concrete (RC) frames is still an unresolved issue due to its complex behavior as the performance of RC building is linked to the features of the structural system, which have many influencing parameters. In this study, an attempt has been made to investigate the displacement scenario of RC residential building seismically located in Zone-V due to the influence of some basic parameters (column dimension, beam dimension, grade of concrete, floor height and seismic weight) in order to obtain a relation which could be used to estimate the expected lateral displacement owing to those selected parameters. In this study, a total of 297 RC buildings designed as per the Indian codal provisions [IS-1893-2002] were analyzed by linear static method using SAP2000 by varying selected and feasible input parameters chosen. The resulting displacements for the change of each parameter were obtained and finally a generalized equation relating the expected displacement as a function of those selected parameters was established using the regression method. The results of the comparison between the displacements obtained from analysis with that of the equation so formed shows that the proposed relation can be used directly to determine the expected displacement with high reliability.

KEYWORDS:

 Special Issue

Article Metrics Graph

Chart Graph | Range Graph

Content

Section

Source

License

COPYRIGHT AGREEMENT AND AUTHORSHIP RESPONSIBILITY

 

All paper submissions must carry the following duly signed by all the authors:

“I certify that I have participated sufficiently in the conception and design of this work and the analysis of the data (wherever applicable), as well as the writing of the manuscript, to take public responsibility for it. I believe the manuscript represents valid work. I have reviewed the final version of the manuscript and approve it for publication. Neither has the manuscript nor one with substantially similar content under my authorship been published nor is being considered for publication elsewhere, except as described in an attachment. Furthermore I attest that I shall produce the data upon which the manuscript is based for examination by the editors or their assignees, if requested.”